To structure tooling amortization in quotes, divide the total tooling cost by the expected production run. This pricing approach spreads the expense across the specific volume committed by the buyer. It clarifies the per-unit cost and supports accurate budget planning for both parties.
- Separate mold cost from material and labor in the quote.
- Use the committed production run to define the denominator.
- Adjust the amortization period if the run extends or shortens.
- Document the assumptions so both sides understand the pricing logic.
- Revisit the calculation at major production milestones.
Why Tooling Amortization Affects Pricing
Tooling cost sits at the center of every injection molding quote. A mold may cost a fraction of the total part cost, yet it defines the unit price for the entire run. Buyers often see the upfront tooling fee as a hurdle. They need a clear method to see how that expense reduces the per-part cost over time.
This guide shows how to structure tooling amortization in quotes. It provides a step-by-step approach that separates the fixed tooling expense from the variable production costs. The result is a pricing model that supports budget planning and transparent communication between the buyer and the molder.
Prerequisites for Accurate Calculation
Before calculating amortization, gather the necessary data. Without these inputs, the quote will rely on guesswork.
- Total Tooling Cost: This includes the mold base, cavities, inserts, and any required finishing work. It should not include shipping unless specified.
- Production Volume: The exact number of parts the buyer intends to produce from that specific mold.
- Material Cost: The price per kilogram of the resin, including any surcharges for additives.
- Machine and Labor Rates: The cost to run the press and the overhead assigned to the production run.
- Yield Percentage: The expected good part rate after accounting for scrap and rework.
If the buyer does not provide a fixed volume, state the assumption clearly in the quote. For example, “Pricing assumes a production run of 50,000 units.” This prevents disputes later when the actual order differs from the estimate.
Step 1: Define the Total Tooling Investment
Start with the full cost of the mold. This is the numerator in your amortization formula.
Break down the tooling cost into line items if possible. A steel mold for a simple consumer part differs significantly from a hardened mold for an automotive component. Listing the base cost, the cavity count, and any special features like side actions or lifts helps the buyer understand the value.
Keep the tooling cost separate from the production cost in the quote document. Mixing these figures obscures the benefit of amortization. The buyer needs to see the upfront investment clearly so they can justify the expense to their finance team.
Step 2: Determine the Production Run Volume
This is the denominator. The production run volume must be specific. Avoid vague terms like “high volume.”
If the buyer orders 10,000 parts today but plans to order 90,000 more next year, the amortization calculation changes. A single run of 10,000 parts carries a higher per-unit tooling cost than a cumulative run of 100,000 parts.
Clarify the scope with the buyer. Does the quote cover only the initial order, or does it cover the total planned lifetime of the mold? If the quote covers the initial order only, state that the tooling cost is fully charged to that lot. If it covers the planned total, spread the cost across that total.
Step 3: Calculate the Amortized Tooling Cost per Unit
Divide the total tooling cost by the production run volume.
Formula: Tooling Cost / Production Volume = Amortized Tooling Cost per Part
Example: A mold costs $15,000. The committed production run is 30,000 parts.
$15,000 / 30,000 = $0.50 per part.
This $0.50 is added to the material and machine costs to determine the base part price. This step converts a fixed expense into a variable cost. It allows the buyer to compare the molder’s quote against other suppliers or even against their internal cost models.
Step 4: Build the Per-Unit Production Cost
Calculate the cost of producing one good part without tooling. This includes material, machine time, and labor.
- Material: Part weight times resin price.
- Machine: Cycle time times machine hourly rate.
- Labor: Operator hours times labor rate.
- Overhead: Factory overhead percentage applied to the above.
Adjust for yield. If the yield is 95%, divide the total production cost by 0.95. This ensures the price covers the scrap.
Combine this production cost with the amortized tooling cost from Step 3.
Total Part Price = (Material + Machine + Labor + Overhead) / Yield + Amortized Tooling Cost.
Step 5: Apply Margin and Overhead
Add the molder’s gross margin to the calculated part price. Do not add margin to the tooling cost if you are amortizing the tooling. The tooling cost is an investment. The production cost is the service.
Keep the margin structure consistent. If you add 15% to the production cost, state it clearly. Buyers understand margins. Hiding them in the tooling amortization creates confusion. A transparent margin structure builds trust.
Step 6: Present the Quote with a Cost Breakdown
A flat price is not enough for budget planning. Show the buyer how the price was built.
Use a table to display the components. This makes the pricing logic visible and easy to verify.
| Cost Component | Calculation Method | Amount per Part |
|---|---|---|
| Material | 0.2 kg x $3.00/kg | $0.60 |
| Machine | 0.5 min x $12.00/hr | $0.10 |
| Labor | 0.05 hr x $20.00/hr | $0.01 |
| Overhead | 10% of Subtotal | $0.07 |
| Amortized Tooling | $15,000 / 30,000 | $0.50 |
| Subtotal | $1.28 | |
| Margin | 20% | $0.26 |
| Total Unit Price | $1.54 |
This format helps the buyer identify which factors drive the price. If they want to lower the cost, they can see that changing the resin or increasing the volume are the levers available.
Step 7: Define the Volume Threshold
State clearly what happens if the production volume changes.
If the buyer orders less than the assumed volume, the tooling cost per unit rises. If they order more, it drops. Define the threshold. For example, “Pricing is valid for 25,000 to 35,000 units. Volumes below 25,000 will incur a higher tooling amortization.”
This protects the molder from absorbing a short run. It also gives the buyer a target. They know exactly how many parts they need to produce to hit the quoted price.
Common Mistakes in Tooling Amortization
Assuming Infinite Volume: Some quotes assume the mold will produce parts for ten years. This is rarely accurate. Molds wear. Designs change. The market shifts. Use the committed volume, not a hypothetical future.
Ignoring Scrap: If you calculate the production cost without adjusting for yield, your margin will shrink. Always divide by the yield percentage.
Changing the Denominator: Do not mix initial order volume with lifetime volume in the same quote without clear labeling. If the initial order is 5,000 parts and the planned lifetime is 50,000, the cost for the first 5,000 parts is higher than the average cost over 50,000.
Hiding the Tooling Cost: Do not bury the tooling cost in the unit price. Keep it visible. Buyers need to see the investment to justify it to their stakeholders.
Verification Step
Before sending the quote, verify the math and the assumptions.
- Check the tooling cost division.
- Confirm the production volume matches the buyer’s request.
- Review the yield adjustment.
- Ensure the margin is applied correctly.
- Read the volume threshold clause.
Ask a second person to review the quote. A fresh set of eyes catches errors that the preparator misses.
Send the quote with a brief explanation of the amortization method. A short note saying “Tooling cost is spread across the 30,000 unit run” removes ambiguity. It sets the stage for a productive conversation about pricing and budget planning.
If the buyer accepts the quote and the volume changes, update the amortization calculation. Do not let the old numbers stand. Accurate pricing requires current data.
Frequently asked questions
Can I amortize tooling cost over a longer period than the committed run?
Yes, but only if the buyer agrees to the extended production plan. The quote must clearly state the assumed total volume. If the buyer does not commit to that volume, use the initial order size for the calculation.
What if the tooling cost is higher than the total production value of the run?
This usually happens with low-volume runs. In this case, the tooling cost may exceed the production cost. You can still amortize it, but the per-unit price will be high. Consider offering a prototype tool or a different process if the volume is too low.
How do I handle price changes in resin during the production run?
State the price validity period in the quote. If the run is long, include a price adjustment clause. This allows you to update the material cost component while keeping the tooling amortization fixed based on the original volume.
Is tooling amortization the same as depreciation?
No. Depreciation is an accounting entry for the asset on the molder's books. Amortization in a quote is a pricing method that spreads the tooling cost over the parts produced by the buyer. The two concepts are related but serve different purposes.
Should I include maintenance costs in the tooling amortization?
Usually, no. Maintenance is a recurring cost. Tooling amortization covers the capital investment in the mold. You can quote maintenance separately as a service fee or include it in the production cost if it is part of the production package.



